Stair renovation Noord-Holland — Omnistair Signature CrystalSand

In Noord-Holland an old pine stair had been a source of frustration for years. Treads sagged, the stair creaked with every step. With EverStep as the base layer and a full Signature finish in CrystalSand, the problem was solved in two working days — not masked.

Product line

Omnistair Signature

Colour

CrystalSand — mottled Stone

Stair type

Quarter-turn, open, wood

Execution

2 working days

What was solved here?

Creaking stairSagging treadsOld pine stairSeamless finishSides + posts + handrailStiffened without demolition

The challenge

A pine stair that had been declining for years

Pine is a relatively soft wood, so older pine stairs can start to work or flex after years of heavy use. The treads clearly sagged and with every step the creak was audible throughout the house.

As a temporary measure, support battens had been added underneath, but the resident didn't consider that a good or lasting solution. The whole stair — sides, posts and handrail — had to be finished in one calm, unified appearance.

The residents knew Omnistair from an earlier Creastairs era and came to the Experience Center specifically to ask whether a system now existed that offered a better solution both structurally and visually.

Old pine stair with sagging treads and support battens

Old pine stair with sagging treads and earlier support battens.

EverStep base layer over existing pine stair — start of the Signature finish

As a first step the EverStep treads are placed over the existing pine stair — the recycled natural-stone composite immediately stiffens the construction and makes the treads evenly true.

The Omnistair solution

The structural problem solved, not masked

Day 1: walls, floors and ceiling masked. The temporary support battens removed. Stair, posts, sides and handrail sanded and degreased. EverStep treads placed — the ultra-thin base layer in recycled natural-stone composite that immediately adds stability to the construction. All seams chamfered, irregularities filled.

Day 2: the full Signature finish in CrystalSand, Stone texture with Design Pigments. Treads, sides, stringers and handrail elements fully integrated — one continuous, seamless whole.

—EverStep base layer — recycled natural-stone composite
—Fully seamless Signature finish
—Sides, posts and handrail included
—Stone texture with Design Pigments in CrystalSand
—No demolition — fits directly over the existing construction

The result

On day two the resident said it straight away: the creak is gone

The stair looks calmer, cleaner and now fits much better with the rest of the entrance. No loose elements, no visible transitions. CrystalSand with Stone texture and Design Pigments gives the hall a warm, architectural feel.

Signature CrystalSand — masked work area, overlay treads placed — Everything neatly masked, the stiffening overlay treads in place — the base for the seamless Signature finish.

Signature CrystalSand — sides and balusters in CrystalSand — Progressing steadily — sides and balusters are done, the CrystalSand finish already flows seamlessly through.

Signature CrystalSand — Stone texture detail with Design Pigments — Tread detail — the Stone texture with Design Pigments in CrystalSand. Clean, mineral, no visible seams.

Signature CrystalSand — handrail and mounting plate included — Even the handrail and the wall mounting plate are fully included — no detail skipped.

Signature CrystalSand — view from above — The view from above says it all — treads, sides, handrail and ceiling joint as one calm whole.

Signature CrystalSand — finished handrail detail — Finished handrail detail — the Stone texture with Design Pigments flows seamlessly through to the very end.

Signature CrystalSand — subtle colour difference between treads and surround — Razor-clean and seamless — the client deliberately chose a subtle colour difference between the treads and the rest of the stair. A personal detail that gives the result even more character.

Signature CrystalSand — 3D seamless back and underside of stair — Omnistair Signature is 3D seamless — the back and underside of the stair are fully finished too. Every corner can be seen.

★★★★★

9.2

Customer satisfaction

"We'd been done with that creaking for years. There were already battens under the stair but really that was just a stop-gap. We wanted something that felt firm AND looked good all around. On day two I said it straight away: I'm already happy. The creak is just gone."

Private client — Noord-Holland, 2026

"The creak is gone — and the stair finally feels firm again."

"No loose parts, no visible seams. Just one whole."

"Two days' work, years of difference."

Frequently asked questions

Practical answers

Recognise this on your stair?

A certified Omnistair installer assesses the situation and gives honest advice — no obligations.

Request an assessment